Product Detail Information

Material Section: Chemical
Trade Name: Duraltex (Pretreatment for Flexolith)

  • Product Info
  • Attachments
  • Recommendations
 
This product is Not Patented
 
Manufacturer: The Euclid Chemical Company
Address: 19218 Redwood
          Cleveland ,  Ohio   44110
 
Background description of company and its products: 
  For nearly 100 years, Euclid Chemical has been producing quality products for concrete and concrete repair.
Recommended Uses-Primary:  Miscellaneous
Recommended Uses-Alternate:  Miscellaneous
Outstanding Features or Advantages Claimed:
  Excellent pre-treatment of cracks and concrete substartes prior to the application of Flexolith (Thin Polymer Epoxy Overlay.)
General Composition of Material:
  100 % reactive epoxy resin and 100% Reactive epoxy hardener
Date introduced on Market: 0000-00-00
Alternate for Following Existing Product: Other Epoxy Healer/Sealer Primers
Cost Per Unit Material (F.O.B.): $35.00
Royalty Cost: $0.00
Cost Per Unit in Place: $3.00
 
Material Specifications Furnished by Manufacturer?  To Be Mailed
Product Availability:  Non-Seasonal , Delivery at Site Within 14  Days after Receipt of Order
At Cost $0.00 for Laboratory Testing
Free for Field Testing
 
This product meets requirements of following specifications:
    ASTM: C 881
Another office of the Kentucky Department of Highways has been contacted.
  Contacted Office: Construction     Contact Date: Sep 09, 2010
 
This information is filed by  Andrew Fulkerson on  Oct 13, 2009
Contact Information:
  The Euclid Chemical Company
  19218 Redwood
  Cleveland,   Ohio  44110
  Phone: 1.800.321.7628
  Email: afulkerson@euclidchemical.com
 
 
Select the attachment you wish to open and double click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.
 
Attached Files for This Product
 
File Name
Type
Size
Uploaded By
Organization
Date
Duraltex - Pretreatment.pdf
application/pdf170249Andrew FulkersonThe Euclid Chemical Company
Oct 13, 2009
 
This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet.  As date of  Dec 01, 2009, its status is  phase  IV.   Please see bottom table for detail information about phase.
Notes:
  Approved for experimental use.
 
Recommendations and Comments
 
Division
Reviewer
Recommendation
Comment
Response
Date
KYTCAgencyN/AMaterial should be elevated to Phase IV to allow comparative evaluation with other similiar high friction surface treatments.
Nov 30, 2009
Division of MaterialsAgencyApproveProduct is comparable to other materials in Phase IV. This product is being elevated to Phase VI for comparison reviews of similar materials.
Dec 01, 2009
 
NEW PRODUCTS COMMITTEE
EXPLANATION OF PHASES
STATE HIGHWAY ENGINEER'S MANUAL
CHAPTER 49-19.0500
Phase I   Product has been submitted and is pending initial review by the chairman of the committee.
Phase II   The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase III   Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase IV   Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase V   The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
      a.
b.
c.
Phase VI   Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase VII   Product has been sent the New Product Review Committee for final approval consideration.
Phase VIII   Not a product to be evaluated by the New Products Review Committee.
      a.
b.
c.
d.
Phase IX   Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed.
Phase X   Product has been approved and specifications or special note exists.
Phase XI   Product is approved for use however there is no specification or special note. Product must have KYTC approval before use.
Phase XII   Reserved
Phase XIII   Product not approved for use in Kentucky highway or bridge construction.
      a.
b.
c.
d.
e.
f.
g.
h.
Phase XIV   Reserved
Phase XV   Reserved