| Product Detail Information |
Material Section: Construction
Trade Name: EG-2S
- Product Info
- Attachments
- Recommendations
| Generic Name: Double Net Straw Blanket | ||||||
| This product is Not Patented | ||||||
| Manufacturer: Manufacturer | ||||||
| Address: 1800 Springhead Church Rd | ||||||
| Willacoochee , GA 31650 | ||||||
| Background description of company and its products: | ||||||
| L&M Supply Co is a leading manufacturer and distributor of erosion control and geotextile products. L&M manufactures straw, straw/coconut, coconut, excelsior, and TRM blankets and wattles/logs. | ||||||
| Recommended Uses-Primary: Mulch and Erosion Controls | ||||||
| Recommended Uses-Alternate: Miscellaneous | ||||||
| Outstanding Features or Advantages Claimed: | ||||||
| EG-2S is recommended for use on slopes up to 2:1 and in medium flow channels. EG-2S is a short-term blanket recommended for up to 12 months. | ||||||
| General Composition of Material: | ||||||
| Matrix- 100% agricultural cured straw- 8 oz/yd2 Netting-Top and bottom photodegradable polypropylene with 0.588x0.5 inch openings. Stitching- 600 Denier degradable yarn @ 2 inch transverse stitch spacing | ||||||
| Date introduced on Market: 2006-05-04 | ||||||
| Cost Per Unit Material (F.O.B.): $20.00 | ||||||
| Royalty Cost: $0.00 | ||||||
| Cost Per Unit in Place: $25.00 | ||||||
| Material Specifications Furnished by Manufacturer? To Be Mailed | ||||||
| Product Availability: Non-Seasonal , Delivery at Site Within 10 Days after Receipt of Order | ||||||
| At Cost $0.00 for Laboratory Testing | ||||||
| Free for Field Testing | ||||||
| This product meets requirements of following specifications: | ||||||
| AASHTO: RECP(07-07)-14 | ||||||
| This product has/is being evaluated by following Highway authorities or agencies: | ||||||
| Georgia DOT, Florida DOT, Tenneseee DOT, South Caolina DOT | ||||||
| This product is approved for use by other highway authorities or other agencies? | ||||||
| Georgia DOT, Florida DOT, Tenneseee DOT | ||||||
| Another office of the Kentucky Department of Highways has been contacted. | ||||||
| Contact Date: Nov 30, -001 | ||||||
| This information is filed by Jody Cabe on Feb 23, 2010 | ||||||
| Contact Information: | ||||||
| Manufacturer | ||||||
| 1800 Springhead Church Rd | ||||||
| Willacoochee, GA 31650 | ||||||
| Phone: 800-948-7870 | ||||||
| Email: jcabe@landmsupplyco.com | ||||||
Select the attachment you wish to open and double click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience. |
| This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of May 25, 2010, its status is phase XIII. Please see bottom table for detail information about phase. | ||||||
| Notes: | ||||||
| Product does not meet current specifications. | ||||||
Recommendations and Comments |
||||||
Division |
Reviewer |
Recommendation |
Comment |
Response |
Date |
|
|---|---|---|---|---|---|---|
| Construction | Rachel Mills | Disapprove | This material is covered under specification 827.07. However, the material does not meet the following performance criteria and should not be placed on the list of approved materials: 827.07 F) Performance 2) Product fails to sustain the minimum shear stress of 1.75 psf required in the specification. | Mar 09, 2010 | ||
| NEW PRODUCTS COMMITTEE EXPLANATION OF PHASES STATE HIGHWAY ENGINEER'S MANUAL CHAPTER 49-19.0500 |
|||
| Phase I | Product has been submitted and is pending initial review by the chairman of the committee. | ||
| Phase II | The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage. | ||
| Phase III | Product is under detailed laboratory and/or literature review by the New Product Review Committee. | ||
| Phase IV | Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement. | ||
| Phase V | The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product. | ||
| a. b. c. |
|||
| Phase VI | Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable). | ||
| Phase VII | Product has been sent the New Product Review Committee for final approval consideration. | ||
| Phase VIII | Not a product to be evaluated by the New Products Review Committee. | ||
| a. b. c. d. |
|||
| Phase IX | Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed. | ||
| Phase X | Product has been approved and specifications or special note exists. | ||
| Phase XI | Product is approved for use however there is no specification or special note. Product must have KYTC approval before use. | ||
| Phase XII | Reserved | ||
| Phase XIII | Product not approved for use in Kentucky highway or bridge construction. | ||
| a. b. c. d. e. f. g. h. |
|||
| Phase XIV | Reserved | ||
| Phase XV | Reserved | ||
