| Product Detail Information |
Material Section: Physical
Trade Name: Typar 3601G
- Product Info
- Attachments
- Recommendations
| This product is Patented | ||||||
| Manufacturer: Fiberweb, Inc. | ||||||
| Address: 70 Old Hickory Blvd. | ||||||
| Old Hickory , Tennessee 37138 | ||||||
| Background description of company and its products: | ||||||
| Fiberweb, Inc. is the 3rd largest manufacturer of nonwoven fabrics in the world with annual sales of nearly $1 billion. | ||||||
| Recommended Uses-Primary: Miscellaneous | ||||||
| Recommended Uses-Alternate: | ||||||
| Outstanding Features or Advantages Claimed: | ||||||
| -35 year documented history -excellent strength to weight ratio | ||||||
| General Composition of Material: | ||||||
| polypropylene | ||||||
| Date introduced on Market: 0000-00-00 | ||||||
| Alternate for Following Existing Product: any geotextiles | ||||||
| Cost Per Unit Material (F.O.B.): $0.75 | ||||||
| Royalty Cost: $0.00 | ||||||
| Cost Per Unit in Place: $0.00 | ||||||
| Material Specifications Furnished by Manufacturer? To Be Mailed | ||||||
| Product Availability: Non-Seasonal , Delivery at Site Within 16 Days after Receipt of Order | ||||||
| At Cost $0.00 for Laboratory Testing | ||||||
| Free for Field Testing | ||||||
| This product meets requirements of following specifications: | ||||||
| AASHTO: M288 | ||||||
| This product has/is being evaluated by following Highway authorities or agencies: | ||||||
| Montana DOT, New Mexico DOT, South Carolina DOT | ||||||
| This product is approved for use by other highway authorities or other agencies? | ||||||
| Nebraska DOT (routine), Tennessee DOT (routine), Alabama DOT (routine) | ||||||
| Another office of the Kentucky Department of Highways has been contacted. | ||||||
| Contact Date: Nov 30, -001 | ||||||
| Product Web Page: www.typargeotextiles.com | ||||||
| This information is filed by Ben Coles on Jun 24, 2010 | ||||||
| Contact Information: | ||||||
| Fiberweb, Inc. | ||||||
| 70 Old Hickory Blvd. | ||||||
| Old Hickory, Tennessee 37138 | ||||||
| Phone: 615-847-7137 | ||||||
| Email: bcoles@fiberweb.com | ||||||
Select the attachment you wish to open and double click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience. |
| This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 24, 2010, its status is phase VI. Please see bottom table for detail information about phase. | ||||||
| Notes: | ||||||
| Product falls under specification 843 | ||||||
| NEW PRODUCTS COMMITTEE EXPLANATION OF PHASES STATE HIGHWAY ENGINEER'S MANUAL CHAPTER 49-19.0500 |
|||
| Phase I | Product has been submitted and is pending initial review by the chairman of the committee. | ||
| Phase II | The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage. | ||
| Phase III | Product is under detailed laboratory and/or literature review by the New Product Review Committee. | ||
| Phase IV | Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement. | ||
| Phase V | The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product. | ||
| a. b. c. |
|||
| Phase VI | Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable). | ||
| Phase VII | Product has been sent the New Product Review Committee for final approval consideration. | ||
| Phase VIII | Not a product to be evaluated by the New Products Review Committee. | ||
| a. b. c. d. |
|||
| Phase IX | Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed. | ||
| Phase X | Product has been approved and specifications or special note exists. | ||
| Phase XI | Product is approved for use however there is no specification or special note. Product must have KYTC approval before use. | ||
| Phase XII | Reserved | ||
| Phase XIII | Product not approved for use in Kentucky highway or bridge construction. | ||
| a. b. c. d. e. f. g. h. |
|||
| Phase XIV | Reserved | ||
| Phase XV | Reserved | ||
