Product Information

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 07, 2011, its status is phase IV. Please see bottom table for detail information about phase.

Notes:

Approved for experimental use through fast track request.

Product Detail Information

Material Section: Concrete

Trade Name: Shotcrete MS Fibered w/ MCI

Product Info
Attachments
Recommendations


Generic Name: Shotcrete MS
This product is Not Patented

Manufacturer: The Quikrete Companies
Address: 6225 Huntley Rd
	Columbus , Oh 43229

Background description of company and its products:
	Manufacturer of Cement & Concrete Products throughout the United States, Canada and S America
Recommended Uses-Primary: Patching Materials
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	can be used for horizontal, verical and overhead applications has a very low water cement ratio material achieves very high strengths improved sulphate resistance high adhesion & low sag low permeability *protects steel reinforcing, carbon steel, galvanized steel and other metals embedded in concrete from corrosion induced by carbonation,chlorides and atmospheric attack
General Composition of Material:
	C-33 sand, portland cement, micro-silica, fiber,corrosion inhibitor
Date introduced on Market: 0000-00-00
Alternate for Following Existing Product: Shotcrete MS
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 10 Days after Receipt of Order
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	ASTM: C-1480
This product has/is being evaluated by following Highway authorities or agencies:
	Pennsylvania
This product is approved for use by other highway authorities or other agencies?
	Pennsylvania - Bulletin 15
Another office of the Kentucky Department of Highways has been contacted.
	Contact Date: Nov 30, -001

Product Web Page: quikrete.com

This information is filed by jason pinney on Jul 05, 2011
Contact Information:
	The Quikrete Companies
	6225 Huntley Rd
	Columbus, Oh 43229
	Phone: 800-776-6034
	Email: jpinney@quikrete.com


Select the attachment you wish to open and double click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size	Uploaded By	Organization	Date

Attached Files for This Product

	application/pdf	174016	jason pinney	The Quikrete Companies	Jul 05, 2011
	application/pdf	78892	jason pinney	The Quikrete Companies	Jul 05, 2011

Division	Reviewer	Recommendation	Comment	Date
Recommendations and Comments

Ky Transportation Cabinet	Allen Myers	Approve		Jul 07, 2011
Ky Transportation Cabinet	Allen Myers	Approve		Jul 07, 2011
KYTC/Maintenance	Nancy Albright	Approve	experimentally	Jul 07, 2011
Traffic Operations	Jeff Wolfe	Undecided	This product does not appear to have applications related to Traffic Operations. We would defer to subject matter experts within the Cabinet.	Jul 06, 2011
Ky Assoc. of Hwy Contractors	Michael LaRue	Undecided		Jul 06, 2011
KYTC/Construction	Steve Criswell	Approve	Based on the attached information I would recommend this as a experimental product.	Jul 06, 2011


NEW PRODUCTS COMMITTEE EXPLANATION OF PHASES STATE HIGHWAY ENGINEER'S MANUAL CHAPTER 49-19.0500
Phase I	Product has been submitted and is pending initial review by the chairman of the committee.
Phase II	The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase III	Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase IV	Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase V	The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
		a. b. c.
Phase VI	Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase VII	Product has been sent the New Product Review Committee for final approval consideration.
Phase VIII	Not a product to be evaluated by the New Products Review Committee.
		a. b. c. d.
Phase IX	Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed.
Phase X	Product has been approved and specifications or special note exists.
Phase XI	Product is approved for use however there is no specification or special note. Product must have KYTC approval before use.
Phase XII	Reserved
Phase XIII	Product not approved for use in Kentucky highway or bridge construction.
		a. b. c. d. e. f. g. h.
Phase XIV	Reserved
Phase XV	Reserved