Product Detail Information

Material Section: NA
Trade Name: BlinkerBeacon

  • Product Info
  • Attachments
  • Recommendations
 
Generic Name: Solar Powered Beacon Sign Light
This product is Not Patented
 
Manufacturer: TAPCO
Address: 5100 West Brown Deer Road
          Brown Deer ,  WI   53223
 
Background description of company and its products: 
  Providing Products and Services for the Traffic Control and Parking Industries since 1956, Traffic & Parking Control Company, Inc. (TAPCO) is a manufacturer and distributor of Traffic and Parking Control Products, including: Traffic Signs (Including Blink
Recommended Uses-Primary:  Traffic Marking Materials
Recommended Uses-Alternate:  Traffic Marking Materials
Outstanding Features or Advantages Claimed:
  Since no connection to the electrical grid is required,they can be placed in virtually any location, and are unaffected by electrical grid failures. They require no trenching, wiring, cabling or specialized work crews so the installation process is greatly simplified, minimizing installation costs, labor and traffic disruption. The solar-charged battery eliminates electrical bills. Component longevity reduces maintenance, typically operating maintenance-free for up to five years, with a simple battery swap to re-energize.
General Composition of Material:
  All metal parts are 5052-H32 aluminum or stainless steel.
Date introduced on Market: 0000-00-00
Alternate for Following Existing Product: Hard Wired Beacn Sign Light
Cost Per Unit Material (F.O.B.): $1800.00
Royalty Cost: $0.00
Cost Per Unit in Place: $1900.00
 
Material Specifications Furnished by Manufacturer?  To Be Mailed
Product Availability:  Non-Seasonal , Delivery at Site Within 30  Days after Receipt of Order
Can Samples Be Provided?  Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing
 
This product meets requirements of following specifications:
    Others: Flash Pattern is MUT
This product has/is being evaluated by following Highway authorities or agencies:
  Currently seeking approval in all 50 states.
This product is approved for use by other highway authorities or other agencies?
  New product in which we are seeking approval for in all 50 states.
Another office of the Kentucky Department of Highways has been contacted.
  Contact Date: Nov 30, -001
 
Product Web Page:  www.tapconet.com
 
This information is filed by  Mark Stine on  Mar 26, 2012
Contact Information:
  TAPCO
  5100 West Brown Deer Road
  Brown Deer,   WI  53223
  Phone: 414-333-4862
  Email: mstine@tapconet.com
 

There is not any attachment for this product screened by administrator, now.

 
This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet.  As date of  Jan 08, 2013, its status is  phase  II.   Please see bottom table for detail information about phase.
Notes:
  Sent for initial review to Traffic Operations.
 
Recommendations and Comments
 
Division
Reviewer
Recommendation
Comment
Response
Date
KYTCTim TharpeUndecidedIt appears that this product would have viable uses in appropriate locations. However, we would consider all vendors who provide similar devices prior to application.
Feb 25, 2013
 
NEW PRODUCTS COMMITTEE
EXPLANATION OF PHASES
STATE HIGHWAY ENGINEER'S MANUAL
CHAPTER 49-19.0500
Phase I   Product has been submitted and is pending initial review by the chairman of the committee.
Phase II   The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase III   Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase IV   Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase V   The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
      a.
b.
c.
Phase VI   Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase VII   Product has been sent the New Product Review Committee for final approval consideration.
Phase VIII   Not a product to be evaluated by the New Products Review Committee.
      a.
b.
c.
d.
Phase IX   Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed.
Phase X   Product has been approved and specifications or special note exists.
Phase XI   Product is approved for use however there is no specification or special note. Product must have KYTC approval before use.
Phase XII   Reserved
Phase XIII   Product not approved for use in Kentucky highway or bridge construction.
      a.
b.
c.
d.
e.
f.
g.
h.
Phase XIV   Reserved
Phase XV   Reserved