| Product Detail Information |
Material Section: Physical
Trade Name: Wabo�SPS Joint System
- Product Info
- Attachments
- Recommendations
| This product is Not Patented | ||||||
| Manufacturer: Watson Bowman Acme | ||||||
| Address: 95 Pineview Dr. | ||||||
| Amherst , NY 14228 | ||||||
| Background description of company and its products: | ||||||
| Watson Bowman Acme Corp , a BASF Construction Chemicals business located in Amherst, New York, has been at the industry forefront of design and manufacturing expansion control devices for the bridge construction industry. | ||||||
| Recommended Uses-Primary: Joint Sealers and Fillers | ||||||
| Recommended Uses-Alternate: Unknown | ||||||
| Outstanding Features or Advantages Claimed: | ||||||
| The Wabo®SPS silicone profile and silicone adhesive components bond cohesively with virtually no degradation over decades of weather exposure. No priming of the substrate is required. Single component and two component adhesives are available to meet specific project and field conditions. The high peel strength of the adhesives provides assurance for watertightnesss. | ||||||
| General Composition of Material: | ||||||
| Wabo®SPS silicone seal is manufactured of an extrudable custom organic silicone compound and is highly resistant to the effects of ultra violet rays and ozone. The silicone adhesive ensures a tenacious bond and watertightness of the system. | ||||||
| Date introduced on Market: 2011-01-01 | ||||||
| Alternate for Following Existing Product: Preformed Neoprene Seals | ||||||
| Cost Per Unit Material (F.O.B.): $0.00 | ||||||
| Royalty Cost: $0.00 | ||||||
| Cost Per Unit in Place: $0.00 | ||||||
| Material Specifications Furnished by Manufacturer? To Be Mailed | ||||||
| Product Availability: Non-Seasonal , Delivery at Site Within 5 Days after Receipt of Order | ||||||
| At Cost $0.00 for Laboratory Testing | ||||||
| Free for Field Testing | ||||||
| This product meets requirements of following specifications: | ||||||
| ASTM: D2240, D412, D624, D | ||||||
| This product has/is being evaluated by following Highway authorities or agencies: | ||||||
| Watson Bowman Acme is currently in the process of submitting for approval to all state DOT\'s and agencies across the US. | ||||||
| This product is approved for use by other highway authorities or other agencies? | ||||||
| Wabo®SPS is currently in use in experimental stage in CA, LA, NE, GA, IA, ID, NJ, CO. | ||||||
| Another office of the Kentucky Department of Highways has been contacted. | ||||||
| Contact Date: Nov 30, -001 | ||||||
| Product Web Page: www.wbacorp.com | ||||||
| This information is filed by Casey Woodlock | ||||||
| Contact Information: | ||||||
| Watson Bowman Acme Corp | ||||||
| 95 Pineview Drive | ||||||
| Amherst, New York 14228 | ||||||
| Phone: 716-817-5458 | ||||||
| Email: christopher.overby@basf.com | ||||||
There is not any attachment for this product screened by administrator, now.
| This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jan 16, 2013, its status is phase II. Please see bottom table for detail information about phase. | ||||||
| Notes: | ||||||
| Under initial review by Division of Maintenance. | ||||||
| NEW PRODUCTS COMMITTEE EXPLANATION OF PHASES STATE HIGHWAY ENGINEER'S MANUAL CHAPTER 49-19.0500 |
|||
| Phase I | Product has been submitted and is pending initial review by the chairman of the committee. | ||
| Phase II | The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage. | ||
| Phase III | Product is under detailed laboratory and/or literature review by the New Product Review Committee. | ||
| Phase IV | Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement. | ||
| Phase V | The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product. | ||
| a. b. c. |
|||
| Phase VI | Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable). | ||
| Phase VII | Product has been sent the New Product Review Committee for final approval consideration. | ||
| Phase VIII | Not a product to be evaluated by the New Products Review Committee. | ||
| a. b. c. d. |
|||
| Phase IX | Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed. | ||
| Phase X | Product has been approved and specifications or special note exists. | ||
| Phase XI | Product is approved for use however there is no specification or special note. Product must have KYTC approval before use. | ||
| Phase XII | Reserved | ||
| Phase XIII | Product not approved for use in Kentucky highway or bridge construction. | ||
| a. b. c. d. e. f. g. h. |
|||
| Phase XIV | Reserved | ||
| Phase XV | Reserved | ||
