| Product Detail Information |
Material Section: Physical
Trade Name: StreamlinerUV CIPP Light Cured Liner
- Product Info
- Attachments
- Recommendations
| Generic Name: StreamlinerUV Liner | ||||||
| This product is Patented | ||||||
| Manufacturer: LightStream, LP | ||||||
| Address: 1222 Innovative Dr., Suite 110 | ||||||
| San Diego , Ca 92154 | ||||||
| Background description of company and its products: | ||||||
| Made in the United States, StreamLiner UV™ was developed to bring the industry a cured in place pipe product that is strong, durable, cost competitive and environmentally friendly. Our CIPP liner, made from the highest quality materials, has become the | ||||||
| Recommended Uses-Primary: Culverts and Drainage Structures | ||||||
| Recommended Uses-Alternate: | ||||||
| Outstanding Features or Advantages Claimed: | ||||||
| Fastest solution for re-lining Culverts. StreamLinerUV™ is cured with ultraviolet light, not steam or hot water, thereby eliminating curing by-products. It is an excellent solution for customers concerned about flushing styrene-laced water into their sewer systems or disposing of styrene laced steam boiler water, a by-product of using felt liners. In addition, StreamLinerUV™ saves on the burning of hydro carbons, no fuel is needed to constantly heat boiler water. 50 year life span at retention of 72%. 4 to 8 feet per minute curing speed. Versatile from canyons and back yard access to downtown streets. Needs no refrigeration even in high temp environments. 12 month shelf life. | ||||||
| General Composition of Material: | ||||||
| 5 Layers of fabrics: Outer Foil, Outer layer of fiberglass, inner layer of fiberglass, polyester fleece/veil, inner foil. Impregnated with styrene resin. | ||||||
| Date introduced on Market: 2007-01-01 | ||||||
| Alternate for Following Existing Product: Felt Liners | ||||||
| Cost Per Unit Material (F.O.B.): $0.00 | ||||||
| Royalty Cost: $0.00 | ||||||
| Cost Per Unit in Place: $0.00 | ||||||
| Material Specifications Furnished by Manufacturer? To Be Mailed | ||||||
| Product Availability: Non-Seasonal | ||||||
| At Cost $0.00 for Laboratory Testing | ||||||
| At Cost $0.00 for Field Testing | ||||||
| This product meets requirements of following specifications: | ||||||
| ASTM: 2019 Others: ASTM D2990 | ||||||
| This product has/is being evaluated by following Highway authorities or agencies: | ||||||
| North Carolina - Leigh M. Wing, PE - 919 - 508 -1867 | ||||||
| Another office of the Kentucky Department of Highways has been contacted. | ||||||
| Contact Date: Nov 30, -001 | ||||||
| Product Web Page: www.lightstreamliner.com | ||||||
| This information is filed by Anthony Montemarano on Apr 18, 2012 | ||||||
| Contact Information: | ||||||
| Light Stream | ||||||
| 8412 La Jolla Shores Dr. | ||||||
| LA JOLLA, Ca 92037 | ||||||
| Phone: 6198385369 | ||||||
| Email: anthonymgraphics@gmail.com | ||||||
There is not any attachment for this product screened by administrator, now.
| This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Apr 23, 2012, its status is phase II. Please see bottom table for detail information about phase. | ||||||
| Notes: | ||||||
| Initial review began on 4/24/12. | ||||||
Recommendations and Comments |
||||||
Division |
Reviewer |
Recommendation |
Comment |
Response |
Date |
|
|---|---|---|---|---|---|---|
| KYTC - Materials | David Quarles | Approve | Apr 26, 2012 | |||
| NEW PRODUCTS COMMITTEE EXPLANATION OF PHASES STATE HIGHWAY ENGINEER'S MANUAL CHAPTER 49-19.0500 |
|||
| Phase I | Product has been submitted and is pending initial review by the chairman of the committee. | ||
| Phase II | The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage. | ||
| Phase III | Product is under detailed laboratory and/or literature review by the New Product Review Committee. | ||
| Phase IV | Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement. | ||
| Phase V | The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product. | ||
| a. b. c. |
|||
| Phase VI | Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable). | ||
| Phase VII | Product has been sent the New Product Review Committee for final approval consideration. | ||
| Phase VIII | Not a product to be evaluated by the New Products Review Committee. | ||
| a. b. c. d. |
|||
| Phase IX | Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specifcation or special condition(s) listed. | ||
| Phase X | Product has been approved and specifications or special note exists. | ||
| Phase XI | Product is approved for use however there is no specification or special note. Product must have KYTC approval before use. | ||
| Phase XII | Reserved | ||
| Phase XIII | Product not approved for use in Kentucky highway or bridge construction. | ||
| a. b. c. d. e. f. g. h. |
|||
| Phase XIV | Reserved | ||
| Phase XV | Reserved | ||
